Weld any process, anywhere with our most impossible Rebel yet.
Yes – it TIG welds aluminum. You’re not one to back down from a challenge. And now, you’ll never need to. Rebel EMP 205ic AC/DC gives you best-in-class all-process performance with fully loaded MIG, Flux-Cored, Stick, DC TIG – and now AC TIG – capabilities. It’s the most portable, durable, go-anywhere, weld-anything industrial-grade package on the market today.Get the Facts Preorder Rebel 205 AC/DC
Full-function TIG features.
Fixed or limited settings won’t cut it in the industrial world. We built Rebel EMP 205ic AC/DC for welders who want full control over the arc for unmatched performance. That means you get LiftTIG and high frequency (HF) start, AC wave balance (60%–90%), AC frequency (25–400 Hz), pulsed (DC) (1–500 pps), and amplitude offset – the next level in AC TIG adjustment.
MIG. Flux-Cored. Stick. DC TIG. AC TIG. Oh yeah.
Rebel EMP 205ic AC/DC delivers best-in-class performance with no compromise in any process. It runs MIG, Stick, and TIG like it was born to. You can even use 6010 electrodes on a 120 V input line. Dedicated process machines are now a thing of the past.
Crazy smart technology.
Whether you've been welding for two years or 20, Rebel can make your job easier with ESAB’s groundbreaking feature: sMIG (smartMIG). For rookies, there's basic mode, which makes setup simple. And for veterans, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds will truly blow your mind.
Ready for any challenge.
You never know where your next welding job will be or what kind of input power you'll have available, so you need a machine that can go anywhere. That's why we've packed Rebel with a sturdy five-handle roll cage, steel unibody construction, and industrial-grade IP23S-rated protection, as well as the ability to work with 120 V or 230 V power, or even a generator. With a three-year warranty and 100% satisfaction guarantee, Rebel’s Iron Clad Pledge has you covered on and off the jobsite.
The Total Package.
It takes more than a machine to get up and welding. So when you buy a Rebel, you can expect all the equipment you need to get going – right out of the box – from some of the best names in the industry.
- Tweco® Fusion 180 A MIG gun with 10 ft. (3 m) cable
- ESAB Heliarc® HW17 TIG torch outfit with accessory kit and 12.5 ft. (3.8 m) cable
- Spare MIG gun parts kit, including contact tips and drive rolls
- Tweco 200 A electrode holder with 13 ft. (4 m) cable
- Four general purpose 6013 Stick electrodes
- ESAB 70S-6 .030, 4 in., 2 lb. sample spool
- Tweco ground clamp with leads
- Victor® argon flowgauge regulator with 12.5 ft. (3.8 m) gas hose
- 120 V and 230 V adapter plugs
Be a Rebel.