This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice
Aristo SuperPulse'

Previous Next

Aristo SuperPulse

Aristo SuperPulse

If your application demands efficient root runs or positional welding on thin, or thick aluminum or stainless materials, then SuperPulse will provide the optimum solution. With productivity as the objective, todays TIG process is tomorrows Aristo SuperPulse.


  • Makes positional welding easier
  • Allows welding with low heat input
  • Provides uniform penetration
  • Allows operator more control over welding speed
  • TIG-looking weld appearance with MIG
  • Very adaptable to all kind of mechanization, for example, Railtrac and Miggytrac
  • Extends working range with larger wire size
  • Less sensitive to joint gap variations
  • Less sensitive to unequal heat transfer


Download the fact sheet for more information

Extra Information

The prime advantage of the pulse/pulse process is the ability to control the heat input. Pulse/pulse is a well established process and has mainly been focused on aluminum welding.

Now SuperPulse is a further development of the pulse/pulse concept with the following additional combinations:

Pulse/short arc– Replace the TIG process by welding the root pass with the pulse/short-arc process. This process enables full control of the heat input for any thin sheet welding.

Spray arc/pulse– A very efficient process in positional welding of thicker materials. Aluminum can be welded straight upwards without the usual torch manipulation. (Less tiring for the operator)

MIG brazing of very thin sheets is another application where we recommend Aristo SuperPulse.

New welding processes will always require expert advice and training. To find out more about the process or applications surrounding Aristo SuperPulse please contact your local ESAB sales office for further information.

ESAB has welding process centers located in Hanover (US), Florence (US), Gothenburg (SE), Solingen (DE), Utrecht (NL), Waltham Cross (GB), Milan (IT) and Vamberk (CZ). All are prepared to undertake application trials for you, or offer a complete application/training package.


Interested in this product? Contact us.

Contact us online

Call our Product Information & Support Line anytime: 1-800-ESAB-123 (1-800-372-2123)

Welding & Cutting Equipment
181 East Evans Street Suite 18
Florence, SC 29506
Phone: (843)-669-4411

Cutting Systems
181 East Evans Street Suite 18
Florence, SC 29506
Phone: (843)-664-4394

Welding Consumables
801 Wilson Avenue
Hanover, PA 17331
Fax: (717)-637-9859

Colfax Corporation
420 National Business Parkway
5th Floor
Annapolis Junction, MD 20701


Find the Closest Distributor


Find the Closest Distributor