TD Cutmaster 40
The Cutmaster® 40 with SL60™ 1Torch® is the perfect combination of end-user insight, advanced technology, and intelligent design. Packed with power and offering the highest power-to-weight ratio in its class, the Cutmaster 40 with SL60 1Torch also has best in class cutting arc length and the most empowering and engaging user experience no matter the application.
Featured
- Built for portability and durability with the integral multi-handle design
- 40% Duty Cycle depending on application. Automatic voltage input detection from 110-240V and will automatically set the max output. 27 amps for 110 and 40 amps for 200-240V
- Industrial SL60 1Torch quick disconnect with ATC® (Advanced Torch Connector)
- Up to 12 mm (1/2 in.) recommended pierce and cut capacity with maximum sever of 25 mm (1 in.)
- Cutmaster Black Series electrode included for up to 60% longer life of consumable parts
- Industry leading 4-year warranty on power supply and 1-year warranty on torch
Industries
- Automotive Bodies
- General Manufacturing
- HVAC
- Repair and Maintenance
- Training Schools
- Industrial and General Fabrication
Cutting Specifications
| Pierces | 1/2 in. (12 mm) |
| Recommended Cut | up to 1/2 in. (up to 12 mm) |
Cutting Speeds and Thickness
| Plate Thickness | 1/32 in. (1 mm) |
| Recommended Cut Speed | 300 in./min (7670 m/min) |
| Plate Thickness | 1/16 in. (2 mm) |
| Recommended Cut Speed | 275 in./min (6985 m/min) |
| Plate Thickness | 9/64 in. (4 mm) |
| Recommended Cut Speed | 105 in./min (2667 m/min) |
| Plate Thickness | 3/16 in. (5 mm) |
| Recommended Cut Speed | 1778 m/min (70 in./min) |
| Plate Thickness | 1/4 in. (6 mm) |
| Recommended Cut Speed | 30 in./min (762 m/min) |
| Plate Thickness | 3/8 in. (9 mm) |
| Recommended Cut Speed | 20 in./min (508 m/min) |
| Plate Thickness | 1/2 in. (13 mm) |
| Recommended Cut Speed | 10 in./min (254 m/min) |
Dimensions
| Height | 12.6 in. (320 mm) |
| Length | 18.1 in. (460 mm) |
| Width | 7.9 in. (200 mm) |
Input Ratings
| Amps | 29 A |
| Volts | 208 V |
| Amps | 26 A |
| Volts | 230 V |
| Amps | 25.3 A |
| Volts | 115 V |
| Frequency Hz | 50/60 Hz |
| Phase | 1 |
| VAC | 110-240 ±10% VAC |
Operating Specifications
| Operating Temperature | 0-50 °C (32-122 °F) |
Output Ratings
| Amp High | 40 A |
| Amp Low | 15 A |
| Duty Cycle | 40 % |
| Output Current AC | 40 A |
| Duty Cycle | 60 % |
| Output Current AC | 30 A |
| Duty Cycle | 100 % |
| Output Current AC | 20 A |
Plasma Gas Requirements
| Gas Flow | 170 cfh (80 l/min) |
| Gas Pressure | 6.2-8.6 bar (90-125 psi) |
| Gas Requirements | Compressed Air |
Weight
| Weight | 10 kg (22 lb) |
Part Numbers and Accessories
*Cutmaster 40 power supply, SL60 90° torch with lead, work lead with ground clamp, spare parts kit, input power adapters: 50A to 20A and 20A to 15A, 1/4” NPT air fitting with quick connect, and operating manual.