OK Tigrod 410NiMo

ESAB

OK Tigrod 410NiMo

The following items have been added to your list


x

Bare welding rods of the 420NiMo type alloyed with 13% Cr, 4.5% Ni and 0.5% Mo. This alloy is used for welding similar composition martensitic and martensitic-ferritic steels in different applications, such as hydroturbines.

BUY NOW


Typical Charpy V-Notch Properties

Impact Value Testing Temperature
stress relieved
120 J (88.5 ft-lb) 2 hr 600 degC (1112 degF) -20 degC (-76 degF)
165 J (122 ft-lb) 8 hr 600 degC (1112 degF) -20 degC (-76 degF)
120 J (88.5 ft-lb) 2 hr 600 degC (1112 degF) 0 degC (32 degF)
175 J (129 ft-lb) 8 hr 600 degC (1112 degF) 0 degC (32 degF)

Typical Tensile Properties

Condition Stress Relieved Stress Relieved
Tensile Strength 1000 MPa (145 ksi) 870 MPa (126 ksi)
Yield Strength 930 MPa (135 ksi) 770 MPa (112 ksi)
Elongation 17 % 22 %
Testing Time 2 hr 8 hr
Testing Temperature 600 degC (1112 degF) 600 degC (1112 degF)

Classifications

2
Grade W 13 4
Name EN ISO 14343-A

Consumable Characteristics

Alloy Type Martensitic-ferritic (13 % Cr - 4.5 % Ni - 0.5 % Mo)

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Cr Cu Mn Mo Ni P S Si
0.02 % 12 % - 0.4 % 0.4 % 4.5 % 0.02 % 0.01 % 0.4 %
Typical Wire Composition %
0.02 % 12.4 % 0.1 % 0.5 % 0.6 % 4.2 % - - 0.4 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Tigrod 410NiMo
167916R150 FIND A DISTRIBUTOR
167920R150 FIND A DISTRIBUTOR
167924R150 FIND A DISTRIBUTOR

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..