OK Tigrod 317L
Bare, corrosion-resistant, chromium-nickel-molybdenum welding rods for welding austenitic stainless alloys of the 19% Cr, 9% Ni, 3% Mo types. OK Tigrod 317L has good resistance to general corrosion and pitting due to its high content of molybdenum. The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. The alloy is used in severe corrosion conditions such as in the petrochemical, pulp and paper industries.
Typical Charpy V-Notch Properties
| Impact Value | Testing Temperature | |||
| as welded | ||||
| 55 J (40.5 ft-lb) | -196 degC (-321 degF) | |||
| 135 J (99.5 ft-lb) | 20 degC (68 degF) | |||
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 45 % | 600 MPa (87 ksi) | 390 MPa (57 ksi) |
Deposition Data
| Diameter |
| 3.2 mm |
| 2.4 mm |
| 2 mm |
| 1.6 mm |
Classifications
| Wire Electrode |
SFA/AWS A5.9 : ER317L EN ISO 14343-A : W18 15 3 L |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Austenitic (with approx. 8 % ferrite) 19% Cr - 12% Ni - 3% Mo - Low C |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| C | Cr | FN WRC-92 | Mn | Mo | N | Ni | Si | |||||||
| 0.01 % | 18.9 % | 7 % | 1.4 % | 3.6 % | 0.05 % | 13.6 % | 0.4 % | |||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.