OK Tigrod 309L
Bare corrosion resisting chromium-nickel welding rod for welding of similar steels of 24% Cr, 13% Ni types. The alloy is also used for welding of buffer layers on CMn steels and welding of dissimilar joints. When using the wire for buffer layers and dissimilar joints it is necessary to control the dilution of the weld. OK Tigrod 309L has a good general corrosion resistance. When used for joining dissimilar materials the corrosion resistance is of secondary importance.
Typical Charpy V-Notch Properties
| as welded | ||||
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 32 % | 590 MPa (86 ksi) | 430 MPa (62 ksi) |
Classifications
| Wire Electrode |
SFA/AWS A5.9 : ER309L EN ISO 14343-A : W 23 12 L |
Approvals
| Approvals |
CE EN 13479 CWB ER309L NAKS/HAKC 1.6-2.4 mm VdTÜV 10021 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Austenitic (with approx. 10 % ferrite) 24 % Cr - 13 % Ni - Low C |
| Shielding Gas | I1 (EN ISO 14175) |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| C | Cr | Cu | FN WRC-92 | Mn | Mo | N | Ni | P | S | Si | ||||
| 0.02 % | 23.2 % | - | 10 % | 1.8 % | 0.10 % | 0.05 % | 13.4 % | - | - | 0.4 % | ||||
| Typical Weld Metal Analysis % | ||||||||||||||
| 0.015 % | 24.0 % | 0.1 % | - | 1.7 % | 0.1 % | - | 13.0 % | 0.020 % | 0.015 % | 0.4 % | ||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.