OK Tigrod NiCrMo-13
Bare Ni-Cr-Mo rods for welding of high alloyed Ni-base materials, 9% Ni steel and super austenic steels of type 20Cr-25Ni with 4-6% Mo. Can also be used for welding carbon steel to Ni base steel. The weld metal has a very good toughness and is corrosion resistant over a wide range of applications in oxidizing and reducing media.
Typical Charpy V-Notch Properties
| As Welded | |
| Impact Value | 89 ft-lb |
| Impact Value | 120 J |
| Testing Temperature | -166 °F |
| Testing Temperature | -110 °C |
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 40 % | 750 MPa (109 ksi) | 500 MPa (73 ksi) |
Classifications
| Wire Electrode |
SFA/AWS A5.14 : ERNiCrMo-13 EN ISO 18274 : S Ni 6059 (NiCr23Mo16) |
Approvals
| Grade | 12663 (MV) |
| Society | VdTÜV |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Alloyed nickel (Ni + 23 % Cr + 16 % Mo) |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| Al | C | Co | Cr | Fe | Mn | Mo | Ni | P | S | Si | ||||
| 0.3 % | 0.01 % | - | 23.0 % | 1.0 % | 0.2 % | 16.0 % | bal % | - | - | 0.1 % | ||||
| Typical Weld Metal Analysis % | ||||||||||||||
| 0.15 % | 0.002 % | 0.02 % | 22.7 % | 0.5 % | 0.15 % | 15.4 % | - | 0.003 % | 0.002 % | 0.03 % | ||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.