OK Tigrod 5183

ESAB

OK Tigrod 5183

The following items have been added to your list


x

OK Tigrod 5183 was developed to provide the highest strengths possible in the as welded condition of alloy AA 5083 and other similar high magnesium alloys. The more common OK Tigrod 5356 will typically fail to meet the as-welded tensile requirements of AA 5083. The alloy is typically utilised in marine and structural applications where high strengths, high fracture toughness for impact resistance and exposure to corrosive elements are important. The alloy is not recommended for elevated temperature applications due to its susceptibility to stress corrosion cracking. The alloy is non-heat treatable.

BUY NOW


Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded25 %290 MPa140 MPa

Classifications

Wire Electrode EN ISO 18273 : S Al 5183 (AlMg4,5Mn0,7(A))
JIS Z 3232 : A5183
SFA/AWS A5.10 : R5183

Approvals

Grade R 5183
Society ABS
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type AlMgMn

Typical Weld Metal Analysis %

Wire Composition
Al Cr Cu Fe Mg Mn Si Ti Zn
94.200 % 0.08 % 0.01 % 0.13 % 4.9 % 0.65 % 0.04 % 0.100 % 0.01 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Tigrod 5183
OK Tigrod 5183 1.6x1000mm 2.5kg 181616R120 FIND A DISTRIBUTOR
OK Tigrod 5183 2.0mm x1 m 5kg 181620R150 FIND A DISTRIBUTOR
OK Tigrod 5183 2.0x1000mm 2.5kg 181620R120 FIND A DISTRIBUTOR
OK Tigrod 5183 2.4mm 3x5 kg 181624R150 FIND A DISTRIBUTOR
OK Tigrod 5183 2.4x1000mm 2.5kg 181624R120 FIND A DISTRIBUTOR
OK Tigrod 5183 3.2mm x 1 m 5kg 181632R150 FIND A DISTRIBUTOR
OK Tigrod 5183 3.2x1000mm 2.5kg 181632R120 FIND A DISTRIBUTOR
OK Tigrod 5183 4.0mm x 1 m 5kg 181640R150 FIND A DISTRIBUTOR
OK Tigrod 5183 4.0x1000mm 2.5kg 181640R120 FIND A DISTRIBUTOR
OK Tigrod 5183 4.8x1000mm2.5kg 181648R120 FIND A DISTRIBUTOR
x
x

x

Loading..