Exaton 309LMo
22.15.3.L is an austenitic filler material for joining stainless steels to carbon steels or low-alloy steels and for overlay welding. It is used for MIG/MAG welding.
Documents
Typical Charpy V-Notch Properties
| Impact Value | Testing Temperature | |||
| as welded | ||||
| 20 J (15 ft-lb) | -196 degC (-321 degF) | |||
| 95 J (70 ft-lb) | 20 degC (68 degF) | |||
Typical Tensile Properties
| Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| As Welded | 31 % | ISO | 610 MPa (88 ksi) | 450 MPa (65 ksi) |
Recommended Welding Parameters
| Current | Voltage | Wire Diameter | Wire Feed Speed | |
| 40-120 A | 15-19 V | 0.8 mm (0.030 in.) | 4.0-8.0 m/min (157-315 in./min) | |
| 150-260 A | 24-29 V | 1.2 mm (0.047 in.) | 3.0-10.0 m/min (118-394 in./min) | |
| 230-350 A | 25-30 V | 1.6 mm (1/16 in.) | 3.0-5.0 m/min (118-197 in./min) | |
Classifications
| Wire Electrode |
EN ISO 14343-A : G 23 12 2 L SFA/AWS A5.9 : ER(309LMo) EN 10088-1 : ~1.4435 |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.