Exaton 317/317L
317/317L is suitable for joining stainless CrNiMo steels e.g. 317L or similar. It is used for MIG/MAG welding.
Documents
Typical Charpy V-Notch Properties
| As Welded | |
| Impact Value | 104 ft-lb |
| Impact Value | 140 J |
| Testing Temperature | 68 °F |
| Testing Temperature | 20 °C |
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 42 % | 600 MPa (87 ksi) | 380 MPa (55 ksi) |
Recommended Welding Parameters
| Current | 150-260 A |
| Voltage | 24-29 V |
| Wire Diameter | 0.047 in. |
| Wire Diameter | 1.2 mm |
| Wire Feed Speed | 118-394 in./min |
| Wire Feed Speed | 3.0-10.0 m/min |
Classifications
| Wire Electrode |
SFA/AWS A5.9 : ER317L Werkstoffnummer : 1.4438* EN ISO 14343-A : G 19 13 4 L |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| C | Cr | Cu | Mn | Mo | Ni | P | S | Si | ||||||
| <=0.02 % | 19 % | <=0.3 % | 1.5 % | 3.6 % | 14 % | <=0.020 % | <=0.020 % | 0.4 % | ||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.