Exaton NiCrMo-14

Exaton

Exaton NiCrMo-14

The following items have been added to your list


x

NiCrMo-14 is a nickel-chrome-molybdenum alloy of type alloy 686 and is the highest alloyed of all Ni-Cr-Mo alloys. NiCrMo-14 is used for joining nickel alloy such as UNS N06022 (2.4602), UNS N06059 (2.4605), UNS N10276 (2.4819) and super duplex. The material is thermally unstable at temperatures above 1200°C (2192°F) resulting in great risk for intermetallic phases after welding. NiCrMo-14 provides the best corrosion resistance in most applications and is particularly useful for weld overlay surfacing of boiler tubes in waste-to-energy boilers. Also, the material can be used in the petrochemical, chemical, oil and gas and marine industries. It is used for MIG/MAG welding.

BUY NOW


Exaton NiCrMo-14

Documents


Typical Charpy V-Notch Properties

Impact Value Testing Temperature
as welded
75 J (56 ft-lb) -196 degC (-321 degF)
110 J (81 ft-lb) 20 degC (68 degF)

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded41 %815 MPa (118 ksi)565 MPa (82 ksi)

Recommended Welding Parameters

Current 150-260 A
Voltage 24-29 V
Wire Diameter 0.047 in.
Wire Diameter 1.2 mm
Wire Feed Speed 118-394 in./min
Wire Feed Speed 3.0-10.0 m/min

Classifications

Wire Electrode SFA/AWS A5.14 : ERNiCrMo-14
EN ISO 18274 : S Ni6686 (NiCr21Mo16W4)

Approvals

Grade EN 13479
Society CE
Approvals are based on factory location. Please contact ESAB for more information.

Typical Weld Metal Analysis %

Typical Wire Composition %
Al C Cr Cu Fe Mn Mo Ni P S Si Ti W
0.3 % 0.01 % 20 % 0.05 % 0.6 % 0.4 % 16 % 57 % 0.02 % 0.003 % 0.06 % 0.1 % 3.5 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : Exaton NiCrMo-14
S988089820 FIND A DISTRIBUTOR
S988129820 FIND A DISTRIBUTOR
S988169820 FIND A DISTRIBUTOR

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..