OK Autrod 308L'

ESAB

OK Autrod 308L

OK Autrod 308L

A continuous solid corrosion resisting chromium-nickel wire. OK Autrod 308L has a good general corrosion resistance.The alloy has a low carbon content which makes this alloy particularly recommended were there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr - 8% Ni-type and Nb-stabilized steels of the same type if the service temperature will not exceed 350°C.

BUY NOW


Specifications


Typical Tensile Properties

As welded
Elongation Tensile Strength Yield Strength
36 % 90 ksi 65 ksi
Tested at 350°C (662°F). As welded
Elongation Tensile Strength Yield Strength
25 % 71 ksi 54 ksi

Typical Charpy V-Notch Properties

As welded
Impact Value Testing Temperature
81 ft-lb 20 °C
66 ft-lb -60 °C
44 ft-lb -196 °C

Typical Weld Metal Analysis

wire composition
MnMoCuCSiFN WRC-92NiNCr
1.9 %0.20 %0.15 %0.02 %0.4 %9 %9.8 %0.05 %19.8 %

Approvals: ABS; ER308/308L; NAKS/HAKC; 1.0 mm
Classifications: EN ISO 14343-A; G 19 9 L; Wire Electrode; SFA/AWS A5.9; ER308L; Wire Electrode; Werkstoffnummer; ~1.4316; Wire Electrode

Approvals are based on factory location. Please contact ESAB for more information.


Alloy Type: Austenitic (with approx. 8 % ferrite) 19% Cr - 9% Ni - Low C
x

Typical Tensile Properties

As welded
Elongation Tensile Strength Yield Strength
36 % 90 ksi 65 ksi
Tested at 350°C (662°F). As welded
Elongation Tensile Strength Yield Strength
25 % 71 ksi 54 ksi

Typical Charpy V-Notch Properties

As welded
Impact Value Testing Temperature
81 ft-lb 20 °C
66 ft-lb -60 °C
44 ft-lb -196 °C

Typical Weld Metal Analysis

wire composition
MnMoCuCSiFN WRC-92NiNCr
1.9 %0.20 %0.15 %0.02 %0.4 %9 %9.8 %0.05 %19.8 %

Approvals: ABS; ER308/308L; NAKS/HAKC; 1.0 mm
Classifications: EN ISO 14343-A; G 19 9 L; Wire Electrode; SFA/AWS A5.9; ER308L; Wire Electrode; Werkstoffnummer; ~1.4316; Wire Electrode

Approvals are based on factory location. Please contact ESAB for more information.


Alloy Type: Austenitic (with approx. 8 % ferrite) 19% Cr - 9% Ni - Low C
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Autrod 308L
OK Autrod 308L 1.2mm 250kg 1610129320 FIND A DISTRIBUTOR
OK Autrod 308L 1.6mm 15kg MIL 161016982A FIND A DISTRIBUTOR
x
×

Find the Closest Distributor

x

x

Loading..