Coreweld 88HS Ni1

ESAB

Coreweld 88HS Ni1

The following items have been added to your list


x

Coreweld 88HS-Ni1 is recommended primarily for robotic or mechanized high speed welding of sheet steel. Welding speeds up to 90 ipm are possible when welding vertical down. The low slag level of Coreweld 88HS-Ni1 minimizes post weld clean up. For this reason, Coreweld 88HS-Ni1 gives special advantage in applications where post weld coating or painting is specified. Coreweld 88HS-Ni1 is a 1% nickel low alloy metal cored wire designed specifically for high speed welding where a clean weld surface is required. Coreweld 88HS-Ni1 deposits have very few silicon islands and almost no slag at the weld toes.

BUY NOW


Industries

  • Industrial and General Fabrication
  • Railcars
  • Power Poles

Welding Process

  • MCAW - Metal Core Arc Welding

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Mn Ni P S Si
75% Ar - 25% CO2
0.053 % 1.23 % 0.96 % 0.010 % 0.016 % 0.55 %
90% Ar - 10% CO2
0.051 % 1.31 % 0.96 % 0.011 % 0.017 % 0.61 %

Approvals

Society CWB
Grade CSA W48 E551C-Ni1-H4
Approvals are based on factory location. Please contact ESAB for more information.

Typical Charpy V-Notch Properties

Condition Impact Value (met) Testing Temperature
75% Ar - 25% CO2
As Welded 37 J(28 ft-lb) -46 degC(-50 degF)
90% Ar - 10% CO2
As Welded 39 J(29 ft-lb) -46 degC(-50 degF)

Classifications

Grade E80T15-M20A5-Mi1-H4
Name AWS A5.36
Grade E80T15-M21A5-Ni1 H4
Name AWS A5.36
Grade E80C Ni1M H4
Name AWS A5.28
Name ASME SFA 5.36
Name ASME SFA 5.28

Typical Tensile Properties

Condition As Welded As Welded
Reduction in Area 58 % 60 %
Shielding Gas 90% Ar - 10% CO2 75% Ar - 25% CO2
Tensile Strength (met) 598 MPa(86.7 ksi) 576 MPa(83.6 ksi)
Yield Strength (met) 512 MPa(74.3 ksi) 480 MPa(69.6 ksi)
Elongation 26 % 27 %

Recommended Welding Parameters

Current TTW Dist. Voltage Wire Diameter Wire Feed Speed
75% Ar - 25% CO2
230-510 A 19 mm(3/4 in.) 26-36 V 1.6 mm(1/16 in.) 381-1219 mm/min(150-480 in./min)
190-410 A 15.8 mm(5/8 in.) 27-36 V 1.4 mm(.052 in.) 457-1346 cm/min(180-530 in./min)
200-360 A 15.8 mm(5/8 in.) 27-33 V 1.2 mm(.045 in.) 635-1397 mm/min(250-550 in./min)

Deposition Data

Current Deposition Rate Diameter Efficiency (%) Voltage Wire Feed Speed
75% Ar - 25% CO2
210 A 2.4 kg/h(5.2 lb/h) 1.2 mm(.045 in.) 94 % 27 V 635 cm/min(250 in./min)
265 A 3.5 kg/h(7.7 lb/h) 1.2 mm(.045 in.) 96 % 28 V 889 cm/min(350 in./min)
295 A 4.6 kg/h(10.2 lb/h) 1.2 mm(.045 in.) 98 % 29 V 1016 cm/min(400 in./min)
330 A 5.8 kg/h(12.7 lb/h) 1.2 mm(.045 in.) 99 % 32 V 1270 cm/min(500 in./min)
375 A 7.5 kg/h(16.5 lb/h) 1.2 mm(.045 in.) 99 % 33 V 1397 cm/min(550 in./min)
190 A 2.5 kg/h(5.5 lb/h) 1.4 mm(.052 in.) 94 % 25 V 445 cm/min(175 in./min)
240 A 3.5 kg/h(7.7 lb/h) 1.4 mm(.052 in.) 95 % 27 V 635 cm/min(250 in./min)
255 A 4.9 kg/h(10.7 lb/h) 1.4 mm(.052 in.) 98 % 28 V 762 cm/min(300 in./min)
350 A 6.2 kg/h(13.6 lb/h) 1.4 mm(.052 in.) 99 % 31 V 1016 cm/min(400 in./min)
430 A 7.5 kg/h(16.6 lb/h) 1.4 mm(.052 in.) 99 % 36 V 1334 cm/min(525 in./min)
240 A 2.8 kg/h(6.2 lb/h) 1.6 mm(1/16 in.) 91 % 26 V 381 cm/min(150 in./min)
290 A 4.0 kg/h(8.8 lb/h) 1.6 mm(1/16 in.) 95 % 27 V 508 cm/min(200 in./min)
340 A 5.7 kg/h(12.5 lb/h) 1.6 mm(1/16 in.) 98 % 29 V 635 cm/min(250 in./min)
425 A 7.2 kg/h(15.9 lb/h) 1.6 mm(1/16 in.) 99 % 32 V 889 cm/min(350 in./min)
490 A 9.4 kg/h(20.7 lb/h) 1.6 mm(1/16 in.) 99 % 36 V 1207 cm/min(475 in./min)
90% Ar - 10% CO2
180 A 2.4 kg/h(5.2 lb/h) 1.2 mm(.045 in.) 94 % 23.5 V 508 cm/min(200 in./min)
250 A 3.5 kg/h(7.7 lb/h) 1.2 mm(.045 in.) 96 % 25 V 762 cm/min(300 in./min)
300 A 4.6 kg/h(10.2 lb/h) 1.2 mm(.045 in.) 98 % 27 V 1016 cm/min(400 in./min)
375 A 5.8 kg/h(12.7 lb/h) 1.2 mm(.045 in.) 99 % 29 V 1270 cm/min(500 in./min)
450 A 7.5 kg/h(16.5 lb/h) 1.2 mm(.045 in.) 99 % 32 V 1651 cm/min(650 in./min)
200 A 2.5 kg/h(5.5 lb/h) 1.4 mm(.052 in.) 94 % 24 V 445 cm/min(175 in./min)
260 A 3.5 kg/h(7.7 lb/h) 1.4 mm(.052 in.) 95 % 25 V 635 cm/min(250 in./min)
340 A 4.9 kg/h(10.7 lb/h) 1.4 mm(.052 in.) 98 % 27 V 889 cm/min(350 in./min)
420 A 6.2 kg/h(13.6 lb/h) 1.4 mm(.052 in.) 99 % 30 V 1143 cm/min(450 in./min)
450 A 7.5 kg/h(16.6 lb/h) 1.4 mm(.052 in.) 99 % 32 V 1397 cm/min(550 in./min)
240 A 2.8 kg/h(6.2 lb/h) 1.6 mm(1/16 in.) 91 % 24 V 381 cm/min(150 in./min)
310 A 4.0 kg/h(8.8 lb/h) 1.6 mm(1/16 in.) 95 % 26 V 508 cm/min(200 in./min)
400 A 5.7 kg/h(12.5 lb/h) 1.6 mm(1/16 in.) 98 % 28 V 699 cm/min(275 in./min)
440 A 7.2 kg/h(15.9 lb/h) 1.6 mm(1/16 in.) 99 % 29 V 889 cm/min(350 in./min)
515 A 9.4 kg/h(20.7 lb/h) 1.6 mm(1/16 in.) 99 % 33 V 1207 cm/min(475 in./min)
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : Coreweld 88HS Ni1
CW 88HS NI1 .045x33#AWS 243412897 FIND A DISTRIBUTOR
CW 88HS NI1 .052x33#AWS 243412889 FIND A DISTRIBUTOR
CW 88HS NI1 1/16x60#CL 243414075 FIND A DISTRIBUTOR
x
x

x

Loading..