Shield-Bright 309L
Shield-Bright 309L is a rutile cored wire designed for the all-positional welding, except vertical down, of stainless steels to carbon or low alloy steels and for the first layer cladding of carbon and low alloy steels with Ar/15-25%CO2 or CO2 shielding gas.
Typical Charpy V-Notch Properties
| as welded c1 shielding gas | ||||
Typical Tensile Properties
| As welded | As welded | |
| Shielding Gas | 75% Ar - 25% CO2 | 100% CO2 |
| Tensile Strength | 600 MPa (87 ksi) | 539 MPa (78 ksi) |
| Yield Strength | 480 MPa (70 ksi) | 392 MPa (57 ksi) |
| Elongation | 35 % | 51 % |
Deposition Data
| Current | 130-220 A |
| Deposition Rate | 4.2-10. lb/h |
| Deposition Rate | 1.9-4.6 kg/h |
| Diameter | 0.045 in. |
| Diameter | 1.2 mm |
| Voltage | 24-29 V |
| Wire Feed Speed | 228-567 in./min |
| Wire Feed Speed | 5.8-14.4 m/min |
Classifications
| Classifications |
AWS A5.22 : E309T1-1/T1-4 A5.22 : E309LT1-1/T1-4 |
Approvals
| Approvals |
ABS-AWS A5.22 E309LT1-1 ASME II SFA 5.22 E309LT1-1/T1-4 ASME IX F No. 6 AWS A5.22 E309LT1-1/T1-4 CWB AWS A5.22 E309LT1-1, E309LT1-4 G.L.- AWS A5.22 E309LT1-4 MIL-STD-1689 APPLICATIONS-NAVY TUV |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | C Cr Ni |
| Shielding Gas | M21, C1 (EN ISO 14175) |
| Welding Current | DC+ |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Cr | Mn | Ni | P | S | Si | ||||||||
| C1 Shielding Gas | ||||||||||||||
| 0.029 % | - | - | - | 0.024 % | 0.007 % | - | ||||||||
| C1 Shielding gas | ||||||||||||||
| - | 23.1 % | - | 12.4 % | - | - | - | ||||||||
| C1 shielding gas | ||||||||||||||
| - | - | 1.10 % | - | - | - | 0.80 % | ||||||||
| M21 Shielding Gas | ||||||||||||||
| 0.030 % | 23.5 % | 1.30 % | 12.5 % | 0.024 % | 0.007 % | 0.90 % | ||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.