Dual Shield T-5
Dual Shield T-5 is a basic slag flux cored wire that produces crack resistant, highly ductile weld deposits. The small diameter wires, such as .045 & 1/16" diameters can be used out-of-position. The arc characteristics are globular but can be improved with the use of argon mixes. Dual Shield T-5 is recommended for medium to heavy fabrication of many mild steels where superior toughness and crack resistance are required. It is a good choice for mild steel or when being joined to quenched and tempered low alloy high strength steels. The weld metal analysis is similar to an E7018 or E7018-1 low hydrogen electrode.
Industries
- Civil Construction
- Industrial and General Fabrication
- Mobile Equipment
- Railcars
Welding Process
- FCAW (Flux Core)
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
C | Mn | P | S | Si | ||||||||||
75% Ar - 25% CO2 | ||||||||||||||
0.066 % | 1.45 % | 0.007 % | 0.013 % | 0.52 % |
Approvals
Society | TUV |
Approvals are based on factory location. Please contact ESAB for more information. |
Typical Charpy V-Notch Properties
Impact Value | Testing Temperature | ||
130 J(96 ft-lb) | -18 degC(0 degF) | ||
110 J(81 ft-lb) | -29 degC(-20 degF) | ||
96 J(71 ft-lb) | -40 degC(-40 degF) | ||
80 J(59 ft-lb) | -51 degC(-60 degF) | ||
236 J(174 ft-lb) | 2 hr | 621 degC(1150 degF) | -18 degC(0 degF) |
178 J(131 ft-lb) | 2 hr | 621 degC(1150 degF) | -29 degC(-20 degF) |
140 J(103 ft-lb) | 2 hr | 621 degC(1150 degF) | -40 degC(-40 degF) |
126 J(93 ft-lb) | 2 hr | 621 degC(1150 degF) | -51 degC(-60 degF) |
Classifications
ASME SFA 5.36 : ASME SFA 5.20 : AWS A5.36 : E71T5-M21P6-CS1-H4 AWS A5.36 : E71T5-M21A6-CS1-H4 AWS A5.20 : E71T-5C-JH4/T-5M-JH4 |
Typical Tensile Properties
Condition | Stress Relieved | As Welded |
Reduction in Area | 76 % | 71 % |
Shielding Gas | 75% Ar - 25% CO2 | 75% Ar - 25% CO2 |
Tensile Strength | 500 MPa(74 ksi) | 560 MPa(81 ksi) |
Yield Strength | 355 MPa(52 ksi) | 460 MPa(68 ksi) |
Elongation | 34 % | 31 % |
Testing Time | 2 hr | |
Testing Temperature | 621 degC(1150 degF) |
Recommended Welding Parameters
Current | TTW Dist. | Voltage | Wire Diameter | Wire Feed Speed |
75% Ar - 25% CO2 | ||||
140-190 A | 19-25.4 mm(3/4-1 in.) | 19-28 V | 1.2 mm(.045 in.) | 635-889 cm/min(250-350 in./min) |
300 A | 19-25.4 mm(3/4-1 in.) | 32 V | 1.2 mm(.045 in.) | 1651 cm/min(650 in./min) |
220-280 A | 19-25.4 mm(3/4-1 in.) | 29-30 V | 1.6 mm(1/16 in.) | 457-635 cm/min(180-250 in./min) |
280-380 A | 25.4-31.75 mm(1-1.25 in.) | 31-32 V | 1.6 mm(1/16 in.) | 635-1016 cm/min(250-400 in./min) |
240-300 A | 19-25.4 mm(3/4-1 in.) | 29-32 V | 1.2 mm(.045 in.) | 1143-1651 cm/min(450-650 in./min) |
Deposition Data
Current | Deposition Rate | Diameter | Efficiency (%) | TTW Dist. | Voltage | Wire Feed Speed |
75% Ar - 25% CO2 | ||||||
170 A | 3.2 kg/h(7.0 lb/h) | 1.2 mm(.045 in.) | 96 % | 19 mm(3/4 in.) | 19 V | 724 cm/min(285 in./min) |
250 A | 4.9 kg/h(10.8 lb/h) | 1.2 mm(.045 in.) | 91 % | 25.4 mm(1 in.) | 30 V | 1191 cm/min(469 in./min) |
300 A | 6.4 kg/h(14.2 lb/h) | 1.2 mm(.045 in.) | 92 % | 25.4 mm(1 in.) | 32 V | 1539 cm/min(606 in./min) |
300 A | 4.5 kg/h(9.8 lb/h) | 1.6 mm(1/16 in.) | 92 % | 25.4 mm(1 in.) | 30 V | 574 cm/min(226 in./min) |
400 A | 7.3 kg/h(16.1 lb/h) | 1.6 mm(1/16 in.) | 92 % | 25.4 mm(1 in.) | 32 V | 937 cm/min(369 in./min) |