Dual Shield 7000-A1

ESAB

Dual Shield 7000-A1

The following items have been added to your list


x

Dual Shield 7000-A1 is an all-position flux cored electrode recommended for 0.5% Mo steels. It is used in the fabrication and erection of boilers, pressure piping and tubing and other pressure vessel applications. Shielding gas of 100% CO2 and 75% Ar, remainder CO2 may be used. The weld metal analysis is similar to an E7018-A1 low hydrogen electrode.

BUY NOW


Typical Tensile Properties

Condition As Welded Stress Relieved
Tensile Strength 635 MPa (92 ksi) 645 MPa (93 ksi)
Yield Strength 566 MPa (82 ksi) 566 MPa (82 ksi)
Elongation 22 % 26 %
Testing Time 1 hr
Testing Temperature 620 degC (1150 degF)

Deposition Data

Current Deposition Rate Diameter Deposition Efficiency (%) TTW Dist. Voltage Wire Feed Speed
100% CO2
140 A 1.7 kg/h (3.6 lb/h) 1.2 mm (.045 in.) 77.8 % 15.9 mm (5/8 in.) 24 V 508 cm/min (200 in./min)
192 A 2.5 kg/h (5.5 lb/h) 1.2 mm (.045 in.) 79.3 % 15.9 mm (5/8 in.) 25.5 V 762 cm/min (300 in./min)
230 A 3.3 kg/h (7.4 lb/h) 1.2 mm (.045 in.) 81.8 % 19 mm (3/4 in.) 27 V 1016 cm/min (400 in./min)
275 A 4.4 kg/h (9.6 lb/h) 1.2 mm (.045 in.) 83.1 % 19 mm (3/4 in.) 28.5 V 1270 cm/min (500 in./min)
150 A 1.6 kg/h (3.6 lb/h) 1.4 mm (.052 in.) 75.8 % 19 mm (3/4 in.) 23.5 V 381 cm/min (150 in./min)
190 A 2.2 kg/h (4.9 lb/h) 1.4 mm (.052 in.) 77.8 % 19 mm (3/4 in.) 24 V 508 cm/min (200 in./min)
250 A 3.5 kg/h (7.7 lb/h) 1.4 mm (.052 in.) 81.7 % 19 mm (3/4 in.) 25.5 V 762 cm/min (300 in./min)
300 A 4.7 kg/h (10.3 lb/h) 1.4 mm (.052 in.) 82.5 % 19 mm (3/4 in.) 27 V 1016 cm/min (400 in./min)
345 A 6.0 kg/h (13.3 lb/h) 1.4 mm (.052 in.) 84.7 % 19 mm (3/4 in.) 28.5 V 1270 cm/min (500 in./min)
195 A 2.5 kg/h (5.5 lb/h) 1.6 mm (1/16 in.) 85 % 19 mm (3/4 in.) 24 V 381 cm/min (150 in./min)
290 A 4.2 kg/h (9.2 lb/h) 1.6 mm (1/16 in.) 86.5 % 19 mm (3/4 in.) 25.5 V 635 cm/min (250 in./min)
325 A 4.9 kg/h (10.9 lb/h) 1.6 mm (1/16 in.) 85.9 % 19 mm (3/4 in.) 26.5 V 762 cm/min (300 in./min)
352 A 6.0 kg/h (13.1 lb/h) 1.6 mm (1/16 in.) 88.1 % 19 mm (3/4 in.) 27 V 889 cm/min (350 in./min)
382 A 6.7 kg/h (14.7 lb/h) 1.6 mm (1/16 in.) 86.8 % 19 mm (3/4 in.) 28.5 V 1016 cm/min (400 in./min)

Classifications

Classifications AWS A5.29 : E81T1-A1C/A1M
ASME SFA 5.29 :
ASME SFA 5.36 :
AWS A5.36 : E81T1-C1PZ-A1
AWS A5.36 : E81T1-C1AZ-A1

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Mn Mo P S Si
0.05 % 0.90 % 0.55 % 0.01 % 0.01 % 0.60 %
0.05 % 0.90 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : Dual Shield 7000-A1
245012521 FIND A DISTRIBUTOR
245012521-01 FIND A DISTRIBUTOR
245012505-01 FIND A DISTRIBUTOR

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..