OK NiCrMo-13
OK NiCrMo-13 is suitable for welding Ni base materials such as Alloy 59, Hasteloy C-276, Inconel 625 and Incoloy 825. It can also be used for welding super austenitic steels type AISI/ASTM S31254 and S32654. The weld metal provides very good resistance against pitting- and chloride ion stress corrosion cracking.
Typical Charpy V-Notch Properties
| Impact Value | Testing Temperature | |||
| as welded iso | ||||
| 60 J (44 ft-lb) | -196 degC (-321 degF) | |||
| 70 J (52 ft-lb) | -60 degC (-76 degF) | |||
Typical Tensile Properties
| Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| As Welded | 40 % | ISO | 770 MPa (112 ksi) | 430 MPa (62 ksi) |
Deposition Data
| Current | Deposition Rate @ 90% I max | Diameter | Deposition Efficiency (%) | Number of electrodes/kg weld metal | Voltage | |
| 50-70 A | 50 sec | 0.8 kg/h (1,8 lb/h) | 2.5 x 300.0 mm (0.098 x 11,8 in.) | 60 % | 90 | 25 V |
| 60-90 A | 63 sec | 1.2 kg/h (2,6 lb/h) | 3.2 x 350.0 mm (1/8 x 13,8 in.) | 62 % | 47 | 25 V |
| 80-120 A | 81 sec | 1.4 kg/h (3,1 lb/h) | 4.0 x 350.0 mm (5/32 x 13,8 in.) | 62 % | 31 | 27 V |
Classifications
| Classifications |
SFA/AWS A5.11 : ENiCrMo-13 EN ISO 14172 : E Ni 6059 (NiCr23Mo16) |
Consumable Characteristics
| Alloy Type | Ni-based CrMo |
| Coating Type | Basic |
| Ferrite Content | FN 0 |
| Welding Current | DC+ |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Cr | Fe | Mn | Mo | Ni | Si | ||||||||
| 0.013 % | 22.6 % | 0.6 % | 0.17 % | 15.2 % | 61 % | 0.16 % | ||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.