Pipeweld 9010 Plus
Cellulosic coated electrode designed for low alloy steel. Deep penetration welding in all positions, especially in the vertical downward; recommended for welding pipe-lines of API 5LX: X70- X80.
Typical Charpy V-Notch Properties
| Impact Value | Testing Temperature | |||
| as welded aws | ||||
| 60 J (44 ft-lb) | -20 degC (-4 degF) | |||
| 35 J (26 ft-lb) | -30 degC (-22 degF) | |||
Typical Tensile Properties
| Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| As Welded | 22 % | AWS | 700 MPa (102 ksi) | 620 MPa (90 ksi) |
Deposition Data
| Current | Deposition Rate @ 90% I max | Diameter | Deposition Efficiency (%) | Number of electrodes/kg weld metal | Voltage | |
| 65-120 A | 79 sec | 0.82 kg/h (1,8 lb/h) | 3.2 x 350.0 mm (1/8 x 13,8 in.) | 63 % | 56 | 32 V |
| 90-180 A | 78 sec | 1.17 kg/h (2,6 lb/h) | 4.0 x 350.0 mm (5/32 x 13,8 in.) | 63 % | 39 | 34 V |
| 150-240 A | 90 sec | 1.67 kg/h (3,7 lb/h) | 5.0 x 350.0 mm (0.197 x 13,8 in.) | 63 % | 24 | 32 V |
Classifications
| Classifications |
EN ISO 2560-A : E 50 2 1NiMo C 21 SFA/AWS A5.5 : E9010-P1 |
Approvals
| Grade | E 9010-P1 |
| Society | FBTS |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Low alloyed (0.9 % Ni, 0.4 % Mo) |
| Coating Type | Cellulosic covering |
| Welding Current | DC+ |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Mn | Mo | Ni | Si | ||||||||||
| 0.10 % | 1.00 % | 0.40 % | 0.90 % | 0.20 % | ||||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.