Pipeweld 7010 Plus
Cellulosic coated electrode for welding of low alloy steel pipes. Designed for vertical down welding, the deep penetrating arc provides good performance. Suitable for welding pipe steel types API 5L X52 to X60.
Typical Charpy V-Notch Properties
| Impact Value | Testing Temperature | |||
| as welded aws | ||||
| 55 J (41 ft-lb) | -20 degC (-4 degF) | |||
| 45 J (33 ft-lb) | -30 degC (-22 degF) | |||
Typical Tensile Properties
| Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| As Welded | 22 % | AWS | 570 MPa (83 ksi) | 480 MPa (70 ksi) |
Deposition Data
| Current | Deposition Rate @ 90% I max | Diameter | Deposition Efficiency (%) | Number of electrodes/kg weld metal | Voltage | |
| 65-120 A | 90 sec | 0.62 kg/h (1,4 lb/h) | 3.2 x 350.0 mm (1/8 x 13,8 in.) | 58 % | 65 | 31 V |
| 90-180 A | 93 sec | 0.93 kg/h (2,1 lb/h) | 4.0 x 350.0 mm (5/32 x 13,8 in.) | 59 % | 42 | 30.5 V |
| 150-240 A | 100 sec | 1.47 kg/h (3,2 lb/h) | 5.0 x 350.0 mm (0.197 x 13,8 in.) | 67 % | 24 | 28.6 V |
Classifications
| Classifications |
SFA/AWS A5.5 : E7010-P1 EN ISO 2560-A : E 42 2 Z C 21 |
Approvals
| Grade | E 7010-P1 |
| Society | FBTS |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Low alloyed (0.3 % Ni, 0.2 % Mo) |
| Coating Type | Cellulosic covering |
| Welding Current | DC+ |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Mn | Mo | Ni | Si | ||||||||||
| 0.09 % | 0.46 % | 0.24 % | 0.34 % | 0.12 % | ||||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.