Origo Feed 304 M12'

ESAB

Origo Feed 304 M12

Origo Feed 304 M12

Optimized to operate together with the Origo MIG 320/410’s. The Origo Feed M12 is a basic wire feeder for use with these step-controlled power sources. It features an accurate wire feed speed dial, slow wire run-in, burn-back control and torch trigger locking. Wire inching and gas purging are optional. A 23-pin remote receptacle is installed ready to connect MiggyTrac, RailTrac and Push-Pull Torches. A wire reel cover is standard.

BUY NOW


Featured

  • WFS range 31-1000 ipm
  • 2/4 stroke – simplifies welding
  • Adjustable burn-back timer – gives correct stickout
  • Creep start – gradual feed of wire for ultimate starts
  • Quick connectors – shortest possible setup times
  • Multiple mounting options – counterbalance and mast, wheel kit, or hanging bracket
  • Inching/gas purge (optional)

Specifications

Dimensions

Height 16.1 in.
Length 27.1 in.
Width 10.8 in.

Input Voltage

Frequency 50/60 Hz
Voltage 42 V

Weight

Weight 33 lb

Wire Feeder Specifications

Metal Aluminum
Wire Diameter 0.040-0.062 in.
Metal Cored wire
Wire Diameter 0.030-0.062 in.
x

Dimensions

Height 16.1 in.
Length 27.1 in.
Width 10.8 in.

Input Voltage

Frequency 50/60 Hz
Voltage 42 V

Weight

Weight 33 lb

Wire Feeder Specifications

Metal Aluminum
Wire Diameter 0.040-0.062 in.
Metal Cored wire
Wire Diameter 0.030-0.062 in.
Metal Stainless Steel
Wire Diameter 0.023-0.062 in.
Metal Steel
Wire Diameter 0.023-0.062 in.
Max Spool Diameter 12 in.
Wire Feed Speed 31-1000 in./min
Wire Spool Capacity 44 - 60 lb
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : Origo Feed 304 M12
Basic Package MIG 410 Origo Feed 304 M12 0558101329 FIND A DISTRIBUTOR
Basic Package MIG 320 Origo Feed 304 M12 0558101327 FIND A DISTRIBUTOR
Ready to Weld Package MIG 320 Origo Feed 304 M12 0558101326 FIND A DISTRIBUTOR
Ready to Weld Package MIG 410 Origo Feed 304 M12 0558101328 FIND A DISTRIBUTOR

Ready to weld packages include power source, 16 ft. (5 m) work cable/ground clamp, factory installed wheel kit, 6 ft. (1.7 m) cable connection kit, Origo Feed 304 wire feeder with M12 panel, .035/.045 in. (0.9/1.2 mm) V-groove drive rolls/guide tube, swivel mounting post for wire feeder, gas cylinder rack, 15 ft. (4.5 m) Tweco Spray Master 350 MIG gun with .035/.045 in. (0.9/1.2 mm) accessories and R-33-FM-580 gas regulator with adjustable flowmeter.

Basic packages include power source, wire feeder and 15 ft (4.5 m) Tweco Spray Master 350 MIG gun.

Accessories : Origo Feed 304 M12
Connection Cable Set, Air-Cooled Torch, 23 Pole, 114.8 ft. (35.0 m)* 0349312475 FIND A DISTRIBUTOR
Connection Cable Set, Air-Cooled Torch, 23 Pole, 16.4 ft. (5.0 m)* 0349312471 FIND A DISTRIBUTOR
Connection Cable Set, Air-Cooled Torch, 23 Pole, 32.8 ft. (10.0 m)* 0349312472 FIND A DISTRIBUTOR
Connection Cable Set, Air-Cooled Torch, 23 Pole, 49.2 ft. (15.0 m)* 0349312473 FIND A DISTRIBUTOR
Connection Cable Set, Air-Cooled Torch, 23 Pole, 5.5 ft. (1.7 m)* 0349312470 FIND A DISTRIBUTOR
Connection Cable Set, Air-Cooled Torch, 23 Pole, 82.0 ft. (25.0 m)* 0349312474 FIND A DISTRIBUTOR
Inching and gas purge kit 0459465880 FIND A DISTRIBUTOR
MiniBoom counterbalance device (Requires P/N's 0460565880, 0461310880 and 0460946880 0458705880 FIND A DISTRIBUTOR
Adapter for spool diameter 17 in. (440 mm) 0459233880 FIND A DISTRIBUTOR
Feeder strain relief for connection cables 0459234880 FIND A DISTRIBUTOR
Lifting eye 0458706880 FIND A DISTRIBUTOR
Inlet guide for Marathon Pac (use with 899F50) 0558002354 FIND A DISTRIBUTOR
Adapter for 11 lbs. (5 kg) spool 0455410001 FIND A DISTRIBUTOR
Coil adapter 34323 FIND A DISTRIBUTOR
Strain relief for welding torch 0457341881 FIND A DISTRIBUTOR
Steel spool cover, 12 in. (305 mm) 0459431880 FIND A DISTRIBUTOR
Counterbalance mini-boom For 18 in. (457 mm) spools 0458705882 FIND A DISTRIBUTOR
Wheel kit for wire feeder 0458707880 FIND A DISTRIBUTOR

Check box to add

*Includes: control cable, electrode cable, and gas hose.

x
×

Find the Closest Distributor

x

x

Loading..