Lightweight EM 210 and EMP 210 Welders Deliver Big Power, With Superior Performance and Control
October 5, 2021
Annapolis Junction, Md. – ESAB Welding and Cutting Products introduces its EM 210 MIG/Flux Cored welder and EMP 210 MIG/Stick/TIG welder. These inverter-based power sources are small in size but deliver professional-grade power and performance for most auto/truck repair and restoration, light fabrication and construction and HVAC work. These units feature state-of-the-art digital controls typically found on industrial machines and use power management technology that delivers positive arc starts and a smooth, steady welding arc.
"EM 210 and EMP 210 welders have the power to weld up to 3/8-in. metal and the finesse for precision welds on thin sections," says Jay Misas, a product development manager with ESAB. "Their lightweight portability and dual-voltage input power flexibility makes them easy to move around the shop, job site or home garage."
Both welders weigh just 29 lbs. and deliver up to 200 amps of MIG welding power. With the EMP 210, you also get excellent Lift TIG and Stick welding performance. They both use 115/230V primary power and can run off a generator with a 10 kVA output. The technology built into the EM 210 and EMP 210 systems allow welders to gain more control over the weld puddle to produce higher-quality work for welding steel, stainless or MIG aluminum.
Power and Portability
EM 210 MIG/flux cored welding system has a 30 – 200A output and welds material from 22 gauge up to 3/8-inch in a single pass. The unit accepts 4- and 8-inch diameter wire spools. The EMP 210 multi-process MIG/Flux Cored/Stick/Lift TIG welding system has a 10 – 200A output, a stable Lift TIG arc at low amperage for finesse welds and the power to run Stick electrodes up to 5/32-in., including 7018.
The units offer easy-to-read LED digital displays that enable fast, easy and more accurate operation. Controls include MIG wire run-in, burn-back, variable inductance, 2T/4T trigger control and gas pre- and post-flow. The EMP 210 adds Lift TIG arc starts, Stick hot start and Stick arc force control.
These units also come with a generous and premium Tweco and ESAB accessory package. EM 210 comes with a Tweco® Fusion 180 Velocity MIG gun with Tweco connection and Velocity consumables, ground clamp, Argon/CO2 Regulator, Power Adaptor, and a sample of ESAB’s OK Aristorod 12.50 premium 70S-6 solid wire in 0.030 in. diameter.
EMP 210 comes with all of the above, plus a Tweco 17V TIG torch with 50mm Dinse and accessory kit, and electrode holder. Both machines are spool gun-ready for MIG aluminum, and the EMP 210 has an optional remote foot control for TIG welding (spool guns and remote foot control accessories are sold separately).
"With an EM or EMP package, you’re ready to weld the next project that comes through your door, as well as ready to go out the door for field fabrication and repair work," says Misas.
At ESAB, we exist to shape the future of welding and cutting. We connect fabricators with the widest range of products under our industry-leading brand portfolio with the latest technologies to solve virtually any industry challenge - then we back it up with our knowledge, experience and passion to help them be more productive than ever before.
The ESAB EMP 210 and EM 210 offer up to 200A of welding power and come with the industry’s most generous premium accessory package.