News

Annapolis Junction, Md. – Thermal Dynamics®, an ESAB brand, today launched its Cutmaster® 40 manual plasma cutting system, successor of the Cutmaster 42. The power source weighs 22 lbs., has the flexibility to use 115V – 230V primary power and delivers a rated output of 40 amps at 40 percent duty-cycle or better.

On 230V primary, it delivers a recommended cut and pierce capacity on 1/2-in. steel and can sever steel up to 1 in. On 115V primary, it delivers a recommended cut and pierce on 3/8-in. steel. To use 115V, simply connect the supplied 115V adapter to the hardwired 230V plug. The unit is designed for motor sports, mobile fabrication, light construction, HVAC, metal/building/roofing, ...

Featured products include new welding and hardfacing filler metals, a portable wire feeder so tough you can literally drag it through the mud and a 22-lb. plasma cutter that slices 1/2-in. steel.

Annapolis Junction, Md. – ESAB Welding & Cutting Products will offer hands-on demonstrations of its products for arc welding, plasma cutting, oxy-acetylene cutting, carbon-arc gouging, exothermic cutting and personal protective equipment at CONEXPO-CON/AGG 2020, March 10 to 14, in Las Vegas. Look for the ESAB Solutions Tour Truck in booth B7719 of the Bronze Lot, which is the outside lot located at the south end of the Las Vegas Convention Center. In addition, booth visitors will be able to ...

Annapolis Junction, Md. – AMI, an ESAB brand, has collaborated with Wolfram Industrie, a vertically integrated manufacturer of premium tungsten and molybdenum materials, to offer an exclusive line of tungsten electrodes for orbital TIG welding. The AMI-Wolfram Industrie ORBISTAR® series of pre-ground tungsten electrodes can last more than two times longer than other tungstens and reduce arc fault failures by up to 80 percent. The company offers different combinations of tungsten length, diameter, point geometry, surface finish and type, including thoriated and non-thoriated options, to meet specific application requirements.

“ORBISTAR electrodes provide superior arc stability and arc ...

Annapolis Junction, Md. – AMI, an ESAB brand, has launched its Model 317 Orbital Welding Controller at FABTECH 2019, ESAB booth B17087, at Chicago’s McCormick Place, Nov. 11 – 14. Designed for applications in the semiconductor, pharmaceutical, nuclear and other premium pipe fabrication operations, the M317 contains the most modern controls and interface technology to simplify automated welding. This next generation orbital TIG welding system offers an unrivaled user experience through an advanced touchscreen that allows users to better control the weld, improving performance and increasing production efficiency.

“This is the first orbital welding controller that’s designed to manage data,” ...