This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice

Previous Next

Arc Gouging (CAC-A) & Exothermic Cutting

ALL_PRODUCTS_MODE

Arcair
AirPro X4000
AirPro X4000
Introducing the next generation air carbon-arc metal removal torch and cable assembly, AirPro X4000. The unique, patent-pending, pneumatically operated upper arm and an air valve design eliminates air leakage through t ... [Read more]
Arcair
Arcair Carbon Plates
Arcair Carbon Plates
Wide range of applications to control the flow of weld metal Repair broken corners. Repair broken gears. Dams or molds for weld deposit. Eliminates the need for many jigs and fixturesSubstantial t ... [Read more]

Arcair
Arcair Carbon Rods
Arcair Carbon Rods
Wide range of applications to control the flow of weld metal Repair broken corners. Repair broken gears. Dams or molds for weld deposit. Eliminates the need for many jigs and fixturesSubstantial t ... [Read more]
Arcair
Arcair Gouging Electrodes
Arcair Gouging Electrodes
A high grade, all purpose copperclad pointed gouging electrode. It's controlled copper coating improves electrical conductivity (for more efficient, cooler operation) and helps maintain electrode diameter at the point ... [Read more]

Arcair
Arcair Underwater Cutting Electrodes
Arcair Underwater Cutting Electrodes
Electrodes designed especially for the underwater cutting process. They cut fast to reduce expensive underwater diving time.
[Read more]
Arcair
Arcair Underwater Torches
Arcair Underwater Torches
A selection of carefully tested and job-proven Arcair underwater products to handle almost any imaginable underwater cutting or welding application.
[Read more]

Arcair
Arcair-Matic N7500
Arcair-Matic N7500
The Arcair-Matic N7500 gouging system delivers high productivity for any metal fabrication operation where gouging and welding represents a large portion of the work schedule.
[Read more]
Arcair
CutSkill Angle-Arc CSK4000
CutSkill Angle-Arc CSK4000
Arcair CutSkill Angle-Arc® CSK4000 is part of the manual gouging torch & cable assemblies offered by the industry leader in the air carbon-arc products.
[Read more]

Arcair
CutSkill Gouging Electrodes
CutSkill Gouging Electrodes
General purpose electrodes without the copper plating to avoid any chance of copper contamination in the base material. Same high quality blend of carbon and graphite used in other Arcair electrodes.
[Read more]
Arcair
Professional Angle-Arc K3000
Professional Angle-Arc K3000
Arcair Professional Angle-Arc® K3000 is part of the manual gouging torch & cable assemblies offered by the industry leader in the air carbon-arc products.
[Read more]

Arcair
Professional Angle-Arc K4000
Professional Angle-Arc K4000
Arcair Professional Angle-Arc® K4000 is part of the manual gouging torch & cable assemblies offered by the industry leader in the air carbon-arc products. It's the most copied manual gouging torch & cable in t ... [Read more]
Arcair
Professional K-5
Professional K-5
Arcair Professional K-5 is part of the manual gouging torch & cable assemblies offered by the industry leader in the air carbon-arc products. It's a straight handle manual gouging torch design that is used in heavy-du ... [Read more]

Arcair
Professional Tri-Arc
Professional Tri-Arc
Arcair® Professional Tri-Arc® is part of the manual gouging torch & cable assemblies offered by the industry leader in the air carbon-arc products. It's a straight handle manual gouging torch design that is used in heavy ... [Read more]
Arcair
Protex® Alclean
Protex® Alclean
Spray or brush on large areas Note: May turn 2000 Series aluminum black.
[Read more]

Arcair
Protex® Clear Anti-Spatter
Protex® Clear Anti-Spatter
Latex base anti-spatter compound that coats the surface and can be left on for lasting protection.
[Read more]
Arcair
Protex® Extra Anti-Spatter
Protex® Extra Anti-Spatter
Spray or brush onto the parent metal and you are ready to weld in less than one minute.
[Read more]

Arcair
Protex® Original Anti-Spatter
Protex® Original Anti-Spatter
Reduces spatter and protects from slag spoiling clean edges. Protects the parent metal, fixtures, large weldments and jigs from spatter and slag. Use it during heat treating to protect surfaces from scale. ... [Read more]
Arcair
Protex® Plus Anti-Spatter
Protex® Plus Anti-Spatter
Spray onto the parent metal to reduce spatter or slag from adhering.
[Read more]

Arcair
Protex® Tip Dip Anti-Spatter
Protex® Tip Dip Anti-Spatter
High heat resistance to minimize spatter build-up Note: Allow nozzles to cool below red heat before dipping (ignition may occur above 1000˚F)
[Read more]
Arcair
Protex® Zinc Rich Cold Galvanizing
Protex® Zinc Rich Cold Galvanizing
Its zinc content “sacrifices” itself to any metal higher (nobler) than zinc in the chemistry’s periodic table such as steel Forms a chemical bond to the parent metal
[Read more]

Arcair
SEA-WELD Welding Electrode
SEA-WELD Welding Electrode
Specially treated and coated electrodes for underwater structural repairs.
[Read more]
Arcair
SLICE Exothermic Cutting Rods
SLICE Exothermic Cutting Rods
Unlike any other cutting process used today, the Arcair® SLICE systems can cut, burn or pierce virtually any metallic, non-metallic or composite material. Specially designed flux coated cutting rod, patented single pi ... [Read more]

Arcair
SLICE® Battery Ignition Source
SLICE® Battery Ignition Source
Go anywhere and cut, burn, or pierce virtually any metallic, non-metallic or composite material with SLICE exothermic cutting equipment. Accepts the SLICE cutting torch power connection that has the twist-lock power ... [Read more]
Arcair
SLICE® Battery Pack And Utility Pack
SLICE® Battery Pack And Utility Pack
Go anywhere and cut, burn, or pierce virtually any metallic, non-metallic or composite material with this exothermic cutting pack. Comes with all the necessary equipment and cutting rods required to do cutting when ... [Read more]

Arcair
SLICE® Complete Pack
SLICE® Complete Pack
Go anywhere and cut, burn, or pierce virtually any metallic, non-metallic or composite material with this exothermic cutting pack. A self-contained cutting system lends itself well to the emergency / forced entry ... [Read more]
Arcair
SLICE® Cutting Torch
SLICE® Cutting Torch
Go anywhere and cut, burn, or pierce virtually any metallic, non-metallic or composite material with SLICE exothermic cutting equipment. Comes standard with industrial grade oxygen hose 3m (10ft.) long and power cab ... [Read more]

Arcair
SLICE® Industrial Pack
SLICE® Industrial Pack
Go anywhere and cut, burn, or pierce virtually any metallic, non-metallic or composite material with this exothermic cutting pack. A self-contained cutting system lends itself well for maintenance / repair inside of ... [Read more]
Arcair
SLICE® Striker Assembly
SLICE® Striker Assembly
Go anywhere and cut, burn, or pierce virtually any metallic, non-metallic or composite material with SLICE exothermic cutting equipment. The SLICE Striker comes standard with a #10 AWG Power Cable with a twist-lock ... [Read more]

×

Find the Closest Distributor

Mechanized Cutting customer? Click here.

x

Find the Closest Distributor

Mechanized Cutting customer? Click here.

x

x

Loading..