This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice

Previous Next

Victor

HRF 2400 Series Flow Meter

HRF 2400 Series Flow Meter

HRF 2400 series regulator/flowmeter combination are specially designed for MIG, TIG, and other inert gas welding applications. Unique design and construction features make these units equally suited for applications from the industrial jobsite to the laboratory.

Where To Buy


Features

  • Designed for CO2 application (non-siphoned tube cylinders)
  • High flow CO2 applications (SR 310 100 PSIG) (SR 311/312 100 SCFH) with adequate supply or source
  • Designed for core wire applications
  • Machined aluminum body & housing cap
  • 2" (50.8 mm) gauge
  • Stem type seat mechanism
  • 1.75" (44.5 mm) diaphragm - fabric reinforced neoprene
  • Self reseating relief valve (not designed to protect downstream equipment)
  • Sintered inlet filter - bronze
A regulator equipped with a flow gauge is not accurate when a back pressure in excess of 2 PSIG exists at the outlet. Back pressure is caused by a restriction in the equipment downstream of the flow gauge. Metering valves, kinked hoses or even very long hoses are restrictions that can cause back pressure. In applications where back pressure in excess of 2 PSIG can be expected, a regulator equipped with a flow meter should be used. WARNING: High gas withdrawal rates may cause regulator freeze up and will require cylinder manifolding. Consult your gas supplier


Industries

  • Industrial and General Fabrication
  • Repair and Maintenance
  • Structural Steel Fabrication
  • Light Fabrication

Specifications

x
×

Find the Closest Distributor

x

Find the Closest Distributor

x

x

Loading..