Previous Next

ESAB

PUROX 4207 Series

PUROX 4207 Series

Designed for grooving, gouging and plate edge preparation.

Add to shopping list


Features

  • Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle
  • Precise CNC controlled drilling process ensures consistency in performance and quality
  • One-piece tips have triple swaged interior – gas passages are mirror smooth with internal
  • angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf
  • Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames
  • Long, parallel preheat passages permit re-dressing tips without affecting performance
  • One-piece tips are a single piece of solid copper– provide maximum cooling – recommended always for acetylene, and for other fuel gases when heat exposure is unusually severe
  • Two-piece tips – recommended for high efficiency with alternate fuels – solid copper, heavy-wall external sleeve and brass internal sections can be ordered separately to minimize replacement cost

Industries

  • Industrial and General Fabrication
  • Light Fabrication
  • Repair and Maintenance
  • Structural Steel Fabrication

Specifications

Fuel Specifications

16K67

Gas Pressure - Acetylene 9-10 psig
Gas Pressure - Cutting Oxygen 35-40 psig
Total Acetylene Consumption 33-38 cfh
Total Oxygen Consumption 157-180 cfh

16K35

Gas Pressure - Acetylene 12-14 psig
Gas Pressure - Cutting Oxygen 45-50 psig
Total Acetylene Consumption 50-55 cfh
Total Oxygen Consumption 268-303 cfh

Operating Specifications

16K67

Gouge Speed 12-21.6 in./min
Groove Depth 1/8-1/4 in.
Groove Width 1/4-5/16 in.
Tip Size 13 in.

16K35

Gouge Speed 19.2-26.4 in./min
Groove Depth 1/4-3/8 in.
Groove Width 3/8-7/16 in.
Tip Size 19 in.

Tip Specifications

Tip Size 13 in.
Tip Size 19 in.
x
×

Find the Closest Distributor

x

Find the Closest Distributor

x

x

Loading..