This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice

Previous Next

ESAB

PUROX 4203 Series

PUROX 4203 Series

General purpose cutting with natural gas or propane. Medium preheat sufficient for beveling.

Where To Buy


Features

  • Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle
  • One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf
  • Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames
  • Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle
  • One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf
  • Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames
  • Long, parallel preheat passages – permit re-dressing nozzle without affecting performance
  • One-piece nozzle is a single piece of solid copper – provides maximum cooling – recommended always for acetylene, and for other fuel gases when heat exposure is unusually severe
  • Two-piece nozzles – recommended for high efficiency with fuel gases other than acetylene – solid copper, heavy-wall external sleeve and brass internal sections can be ordered separately to minimize replacement cost
  • Conical seats – instant aligning provides tight seal, prevents leaks around nozzle nut

Industries

  • Industrial and General Fabrication
  • Repair and Maintenance
  • Structural Steel Fabrication
  • Light Fabrication

Specifications

Fuel Specifications

16K15

Gas Pressure - Cutting Oxygen 20-28 psig
Gas Pressure - Propane/NatGas 3-5 psig
Total Oxygen Consumption 70-80 cfh
Total Propane/NaturalGas Consumption 6-8 cfh
Gas Pressure - Cutting Oxygen 30-35 psig
Gas Pressure - Propane/NatGas 3-5 psig
Total Oxygen Consumption 80-100 cfh
Total Propane/NaturalGas Consumption 8-10 cfh

Operating Specifications

16K15

Average Kerf Width .060 in.
Metal Thickness 3/8 in.
Tip Size 4 in.
Average Kerf Width .065 in.
Metal Thickness 1/2 in.
Tip Size 4 in.

Tip Specifications

Cleaning Drill Size Cutting 60
Cleaning Drill Size Preheat 68
Metal Thickness 3/8 to 5/8 in.
Preheat Holes 6
Tip Size 3/4 in.
Cleaning Drill Size Cutting 55
Cleaning Drill Size Preheat 59
Metal Thickness 3/4 to 1-1/2 in.
Preheat Holes 6
Tip Size 1-1/2 in.
x
×

Find the Closest Distributor

x

Find the Closest Distributor

x

x

Loading..