This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice

Previous Next

ESAB

OXWELD 1566 Series high speed

OXWELD 1566 Series high speed

Genuine Oxweld two-piece alternate fuel gas cutting nozzles are now available in matching sets. Take the guess work out of choosing the correct external nozzle for the alternate fuel gas being used and internal nozzle size.

Where To Buy


Features

  • Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle
  • One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf
  • Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames
  • Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles – withstands heat and wear – outlasts any copper alloy nozzle
  • One-piece nozzle has triple swaged interior – gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow – clean, smooth cuts with minimal kerf
  • Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames
  • Long, parallel preheat passages – permit re-dressing nozzle without affecting performance
  • One-piece nozzle is a single piece of solid copper – provides maximum cooling – recommended always for acetylene, and for other fuel gases when heat exposure is unusually severe
  • Two-piece nozzles – recommended for high efficiency with fuel gases other than acetylene – solid copper, heavy-wall external sleeve and brass internal sections can be ordered separately to minimize replacement cost
  • Conical seats – instant aligning provides tight seal, prevents leaks around nozzle nut

Industries

  • Industrial and General Fabrication
  • Repair and Maintenance
  • Structural Steel Fabrication
  • Light Fabrication

Specifications

Fuel Specifications

639600

Gas Pressure - Cutting Oxygen 90 psig
Gas Pressure - Fuel Gas 3-5 psig
Gas Pressure - Preheat Oxygen 20-50 psig
Total Fuel Gas Consumption 5-10 cfh
Total Oxygen Consumption 60-80 cfh

639601

Gas Pressure - Cutting Oxygen 90 psig
Gas Pressure - Fuel Gas 3-5 psig
Gas Pressure - Preheat Oxygen 20-50 psig
Total Fuel Gas Consumption 5-10 cfh
Total Oxygen Consumption 110-130 cfh

Operating Specifications

639600

Average Kerf Width .045 in.
Cutting Speed 21-26 in./min
Metal Thickness 1/2 in.
Tip Size 1/2 in.

639601

Average Kerf Width .055 in.
Cutting Speed 20-25 in./min
Metal Thickness 3/4 in.
Tip Size 3/4 in.

Tip Specifications

Metal Thickness 1/2 in.
Natural Gas External Part Number 639322
Natural Gas Internal Part Number 639600
Natural Gas Set Part Number 0558005072
Preheat Holes 12
Propylene External Part Number 998277
Propylene High External Part Number 998557
Propylene High Internal Part Number 639600
Propylene High Set Part Number 0558005094
Propylene Internal Part Number 639600
Propylene Set Part Number 0558005083
Tip Size 1/2 in.
Metal Thickness 3/4 in.
Natural Gas External Part Number 639322
Natural Gas Internal Part Number 639601
Natural Gas Set Part Number 0558005073
Preheat Holes 12
Propylene External Part Number 998277
Propylene High External Part Number 998557
Propylene High Internal Part Number 639601
Propylene High Set Part Number 0558005095
Propylene Internal Part Number 639601
Propylene Set Part Number 0558005084
Tip Size 3/4 in.
x
×

Find the Closest Distributor

x

Find the Closest Distributor

x

x

Loading..