Previous Next


PT-37 Plasmarc Mechanized Cutting Torch

PT-37 Plasmarc Mechanized Cutting Torch

The patented PT-37 torch cuts up to 1 1/4 in. (32 mm) material using air as the plasma and shielding gas. Utilizing a blowback start and an electronically controlled pilot arc the PT-37 sets a new standard for starting reliability, cutting characteristics and consumable life.

Add to shopping list


  • 100% Duty Cycle for enhanced productivity allowing for continuous operation even at maximum thickness
  • Utilizes a "drawn arc" to initiate the cut which eliminates high frequency interference from the starting circuits
  • An optional remote starting system allows the torch to be located up to 150 ft. (45m) away from the power supply
  • Machined torch body with 1 3/8 in. (35 mm) metal handle, available with and without 32-pitch rack to fit industry standard torch holders
  • Robust machined torch components provide for reliability, durability and ease of maintenance
  • Metal nozzle and shield stand up to the toughest cutting conditions
  • Wear parts are available individually, in sets and in value packs which eases ordering and saves money
  • The PT-37 can be used with the following consoles:
               PowerCut 900
               PowerCut 1300
               PowerCut 1600


Cutting Specifications

Cuts Manual 3/4 in.
Severs Manual 1-1/4 in.


Length 18.1 in.

Length of Service Leads

Length 4.5 ft

Output Ratings

Current Capacity @ 100% Duty Cycle

Output Current AC 100 A

Plasma Gas Requirements

Nominal Flow Rate (with 100 A consumables)

Gas Flow 490 cfh (231 l/min)
Gas Pressure 5.5 bar (80 psig)

Find the Closest Distributor


Find the Closest Distributor