Knowledge center BY Category
Cladding of Ni-alloy UNS N08825 in Pressure Vessel Applications: Optimized Efficiency with a Complete Solution.
By Biryulin Denis, ESAB Saldatura | September 1, 2017
Cladding of Ni-alloy UNS N08825 in pressure vessel applications: optimized efficiency with a complete solution. Italian Welding Magazine - #4 - July/August 2017
Posted in Filler Metals
Advantages and Disadvantages of Metal Cored Wires
March 26, 2014
The industry to a large extent still views metal cored wires as being somewhat Marketing smoke and mirrors. It is sometimes very hard to understand how a product that has a higher cost per pound as a filler metal will actually save money when evaluated as cost per pound deposited, or the true cost for the welding application.
Posted in Filler Metals , Tagged with Cored Wire, MCAW
Cored Wire Benefits
March 25, 2014
Welds produced with flux cored electrodes are smooth with almost no ripple. The metal transfer of Dual Shield electrodes produces very little spatter which significantly reduces cleanup time.
Posted in Filler Metals , Tagged with Cored Wire
Cored Wire Trends in the North American Market
March 24, 2014
Since the introduction of cored wires in 1957, the North American Market has seen steady growth and acceptance. Virtually every industry from automotive, structural, transportation, off shore, ship building, light and heavy fabrication is using cored wires while realizing the benefits of increased productivity and efficiency.
Posted in Filler Metals , Tagged with Cored Wire
Cored Wire Trouble-Shooting Guide
March 23, 2014
Consistently good welds throughout a wide range of welding conditions are easily obtained when the variables that affect the flux cored process are understood and controlled.
Posted in Filler Metals , Tagged with Cored Wire
