2
4. The tables are based on a tip-to-work
distance of 3/8 in. (9.4mm) for short arc welding and 3/4 in.
(19.2mm) for spray arc welding.
5. Vertical welding conditions are designed
for vertical up travel, except where otherwise marked. 6.
The welding conditions were developed using specific shielding gases. If the shielding
gases in use are different,
slight adjustments of these conditions will be necessary.
In addition to welding conditions, a
burn-off chart for each wire is presented. With these graphs, the wire-
feed speed for any given current value
may be approximated.
