16 ARCALOY®
Stainless Steel Bare Welding Wires Spools,
Cut Lengths, Coils & Reels Are Available Spools:
Arcaloy stainless steel wires for GMAW
welding are smooth-drawn, with a matte finish. They are gas purged
and chemically cleaned and are protectively
packaged to retain their finish until you are ready to use them.
The smooth-drawn, uniform surface of
the wire coupled with low helix and controlled cast promotes a
steady, uninterrupted feed rate with
constant arc conditions. These factors also contribute to a low rate of
wear on wire guides and contact tube.
All grades of stainless steel electrodes
are layer wound on spools or packaged in a Marathon Pac.
Cut Lengths: Arcaloy
stainless steel wires are furnished in 36" (914 mm) lengths of gas tungsten arc
and oxy-acetylene welding.
Cut length rods are available with either flag/tags ink printed or laser etched
identification. Coils:
Arcaloy stainless steel wires for submerged
arc applications are furnished in the fully annealed condition for
smoother, easier feeding on all types
of automatic submerged arc equipment. All submerged arc wires
are available random wound on fibre
rim coils or pay-off reels.
