11
All-State®
Low Fuming Bronze Low
Fuming Bronze (Bare and FC) General
Purpose Brazing Rod Torch
Application General
Characteristics All-State®
Low Fuming Bronze is available in two types: 1) Bare for use with All-State Brazaloy®
General Purpose Brazing
Flux or the All-State Jet Flux® Dispenser;
2) Flux-coated. In either form, the alloy is designed to meet
today’s high industrial standards.
The flux coated rods have a waterless coating that gives a superior cleaning
action and promotes wetting qualities.
Typical Applications
Fabricating or repairing steels, cast
iron, copper base metals, galvanized and malleable irons or any combination
of these metals.
Qualities Tensile
strength —up
to 60,000 psi (42.19 kgs/mm2) Working
temperatures —1600°F (871°C)
(approx.) Specifications
—AWS A5.7 (R CuZn-C) QQ-R
571-a (R CuZn-3) Procedures
Clean joint area. Heat base metal using
a neutral flame. Apply small amount of flux by melting the coating, or if
bare rods are used, dip the end of
heated rod into All-State Brazo Flux and then apply to the work. Continue to
heat. Melt a drop of alloy when flux
turns liquid. Continue this procedure until job is complete. The All-State Jet
Flux®
Dispenser is recommended for use with bare rods for convenience and speed.
