1
All-State®
No. 11 and 11FC High
Strength Brazing Alloy for Joining Steel and Other Metals
(Except
White Metals) Torch
Application General
Characteristics A
high strength alloy for maintenance and production joining of ferrous and nonferrous
metals (excluding the white metals).
All-State® No. 11 and No. 11FC will give
much higher strengths than ordinary bronze rods and will lower
job costs since less filler metal is
needed. Higher cost silver brazing alloys and many fusion-type welding rods can
be replaced
with All-State® Nos. 11 and 11FC.
Typical Applications
Joining carbon and alloy steels, as
well as many nonferrous materials. Widely used on production of bicycles,
furniture, ornamental railings, radiators
and other large volume items in conjunction with the All-State Jet Flux®
dispensing units
where speed and highest quality are required. Qualities
Tensile strength—up to 85,000
psi (59.77 kgs/mm2) Hardness—90
to 110 BrineIl (500 kg. load) Working
temperature—1200°F-1750°F (649°-954°C)
Remelt temperature—1750°F
(954°C) minimum
