7
Overlay
Alloys All-State
HS-2C® Electrode for Severe Abrasion
AC or DC Reverse Polarity
All Position General
Characteristics For
superior abrasion resistance and moderate impact. Outstanding operator appeal.
Deposits have a low coefficient
of friction. Good hot hardness at 1100°F (593°C).
Typical Applications
For hardsurfacing large areas in earth
moving and rock crushing equipment, augers, asphalt feed screws, sand
pumps, slurry pumps, mixer blades,
crushing and pulverizing mills, scrapers, paddles and wear pads.
Qualities Hardness
—58-62 Rockwell
C Procedures
Clean metal surface. Use All-State®
Chamfer Rod to remove fatigued and damaged metal. On alloy steels preheat
to 300°F (149°C) is suggested.
Maintain a medium arc at about a 45° angle in direction of travel. Remove
slag between
passes. Cool slowly. Diameters
and Recommended Amperages 1/8"
(3.2mm)—110-140 5/32"
(4.0mm)—140-170 3/16"
(4.8mm)—170-210 Identification
All-State HS-2C®
printed on electrode coating and package. Packaging
All sizes in 3-lb. (1.36 kg) and 10-lb.
(4.54 kg) containers.
