17
All-State®
HS Sugar 400 Specially
Designed Electrode for Sugar Mills for Both Abrasion and Impact
DC Straight Polarity
General Characteristics
All-State®
HS Sugar 400 is an electrode for preventative maintenance and has been especially
designed for
applications on the crushers found in sugar mills. It can be applied while the
crushers are turning (4-8 rpms)—therefore
not having to dismantle the crushers—minimizing cost of down time as well
as labor. This electrode
has a globular transfer leaving a rough deposit that is free of slag thus doing
away with the need for slag
removing equipment. Its arc is sufficiently active to withstand the humidity,
the sugar cane bagasse, and impurities
such as sand, rocks and other materials encrusted in the crushing rolls. It can
also be used while the rolls
are still and in need of maintenance. Typical
Applications Sugar
cane crushing rolls. Qualities
Hardness: 60-62
Rc Corrosion resistance:
Excellent Procedures
This electrode may be used while crushing
rolls are in motion during normal crushing operations or while the
rolls are still for maintenance. It
is not necessary to preheat but once welding is begun, maintain the heat to the
base metal to
a minimum. Use a slight weaving motion sufficiently to cover the surface to be
hardfaced. You can
also use it by applying globular droplets of metal to the grinding teeth. Use
direct current straight polarity (electrode
negative).
