13
All-State
Kore-Bide® Tubular
Hardsurfacing All Position Electrode for Severe Abrasion and Impact
AC or DC Reverse Polarity (Electrode
+ ) Typical
Applications KORE-BIDE®
6000 (white tip) Chromium
carbide alloy used in high abrasion, compressive impact loads and erosion found
in: shovel buckets, dredge
bucket lips, crusher mantles and liners, clutch jaws, manganese steel swing hammers,
sprocket teeth, pressure
rolls, grinder rings, grizzly bars and feeder sprouts. Rc - 55 to 60
KORE-BIDE®
6100 (brown tip) Deposits
of extremely hard chromium carbides and nodular columbium carbides will withstand
abrasion and high impact
loads. This alloy can also be applied to bucket teeth. Rc - 58 to 61
KORE-BIDE®
6200 (pink tip) Outstanding
abrasion resistance on steel or grey cast iron in brick extrusion augers, pump
impellers, snow plow shoes,
feed screws, dozer end bits, mixer paddles, scraper blades. Rc - 58 to 62
KORE-BIDE®
6400 (light blue tip) Deposits
resist extreme abrasion at temperatures to 1500° F. Outstanding erosion resistance.
Use on scrapers, blast
furnace feed chutes, sinter crushers, mill guide rolls, hopper teeth and shanks,
cement handling equipment. Rc
- 62 to 64 Qualities
Non-hygroscopic coating and tubular
construction eliminates moisture problems and rebaking.
