11
All-State
HS-65W® The
Ultimate Hardfacing Electrode for Extreme Abrasive Conditions
AC/DC Reverse
General Characteristics
HS-65W®
is a highly alloyed electrode that gives the greatest possible wear resistance
in applications involving extreme
wet or dry sliding mineral abrasion or corrosion. Typical
Applications Ideal
for components and parts operating under extremely severe conditions experienced
by earth moving equipment
and wear resisting parts in cement mills and brick manufacturing.
Qualities This
uniquely complex alloy formulation can produce a hardness of Rc 65 on the first
layer and up to Rc 67 on the
second layer. Two layers maximum are recommended. In addition, this versatile
electrode has good hardness at
temperatures up to 1200°F (649°C). Procedures
Stringer beads recommended. Remove
slag prior to making next weld. Hold the electrode over the weld puddle
instead of slightly in front of it.
Diameters and Recommended Amperages
1/8"
(3.2mm)—130 5/32"
(4.0mm)—170 3/16"
(4.8mm)—220 Identification
All-State HS-65W®
printed on electrode coating and package. Packaging
All sizes in 3-lb. (1.36 kg) and 10-lb.
(4.54 kg) containers.
