Chapter Contents
Click on the section you wish to view
Hardfacing Alloys
Build-Up Alloys
1
Roll Matrix®
Machinable for Low Alloy
and Abrasion Resistant Steels
1
Ni-Matrix®
Electrode for Fabrication and
Build-up of Manganese Steels
3
Super Join-M®
for Hardfacing Build-up
5
Overlay Alloys
7
HS-2C®
Electrode for Severe Abrasion
7
HS 6IP (formerly
HS-7) for High Abrasion and Light Impact
Carbon and Manganese Steels
8
Hard-Tuff
56®
for Heavy Impact and Abrasion on Carbon
and Manganese Steels
9
HS-65W®
for Extreme Abrasive Conditions 11
Ruf-Kut®
(with Tungsten Carbide Particles) for Maximum
Wear and Abrasion Resistance 12
Kore-Bide®
Tubular Hardsurfacing Electrode for Severe
Abrasion and Impact 13
Wear Hard
for Attachment and Build-up on Manganese
and Low Alloy Steels 15
HS Sugar 400
for Sugar Mills for both Abrasion
and Impact 17
MIG Flux Cored
and Open Arc Wires for Build-up
and Hardfacing 19
